Technology in the beauty industry is always advancing as new products and services continue to come up. Fotofacial, also referred to photofacial is a procedure in the beauty industry that exposes the skin to intense pulses of light. The skin is exposed to these pulses for a period of thirty minutes and the pulses penetrate deep. The pulses result in the constriction of blood vessels and collagen in the skin, which causes reduction in age lines and redness. For professional fotofacial Las Vegas is the place to visit.
This procedure is not suitable for people with all kinds of skins. The most suitable candidate are people whose skins are sun-damaged, discolored, blotchy, wrinkled, or freckled. The procedure takes a short time and there is not preparation needed in advance. This makes it very suitable for people whose schedules are very busy.
Skin and other complications are known to result in individuals with dark or highly tanned skins. That makes them unsuitable candidates for this process. If one has a dark or tanned skin, they need to discuss the problem with their dermatologist before proceeding to have the process done. People whose skins are white and not tanned make the best candidates. The procedure should enhance skin texture, reduce pore sizes, minimize wrinkles and fine lines, and remove discoloration if it is performed on the correct skin type.
Comparatively, this process costs more than chemical peels, microdermabrasion among other methods. However, the process costs much less in comparison to most laser skin treatments and cosmetic surgeries. One session usually costs between 500-600 US Dollars. The final costs is determined by number of sessions one attends and the cosmetic issue being treated.
Light waves that the process uses are of high energy. The light serves to encourage collagen synthesis and to eliminate common aging effects. Collagen is one of the naturally-occurring proteins that smoothen the skin by filling in wrinkles. Better results are achieved by attending more sessions. The time between sessions should be three weeks.
The level of brightness of the light used is usually very high. As such, eyes need to be protected using eyeglasses. After that, the area to be treated is applied with a cool gel. The gel acts as a coolant for the skin as well as a lubricant for the equipment used. The practitioner uses the handpiece to apply pulses of bright light briefly.
The whole face or just a section may be treated using this procedure. The total surface area being treated plays a role in the amount of time taken, which ranges from minutes to several hours. The equipment cause a warm sensation. After treatment, the face may be cooled by applying ice on it.
The level of damage sustained by the skin is very low. This shortens the recovery time. Some of the factors upon which recovery time is dependent include the skin condition being treated, number of pulses applied, surface area treated, and skin type. It takes a few hours after treatment for any side effects to go away in most patients.
This procedure is not suitable for people with all kinds of skins. The most suitable candidate are people whose skins are sun-damaged, discolored, blotchy, wrinkled, or freckled. The procedure takes a short time and there is not preparation needed in advance. This makes it very suitable for people whose schedules are very busy.
Skin and other complications are known to result in individuals with dark or highly tanned skins. That makes them unsuitable candidates for this process. If one has a dark or tanned skin, they need to discuss the problem with their dermatologist before proceeding to have the process done. People whose skins are white and not tanned make the best candidates. The procedure should enhance skin texture, reduce pore sizes, minimize wrinkles and fine lines, and remove discoloration if it is performed on the correct skin type.
Comparatively, this process costs more than chemical peels, microdermabrasion among other methods. However, the process costs much less in comparison to most laser skin treatments and cosmetic surgeries. One session usually costs between 500-600 US Dollars. The final costs is determined by number of sessions one attends and the cosmetic issue being treated.
Light waves that the process uses are of high energy. The light serves to encourage collagen synthesis and to eliminate common aging effects. Collagen is one of the naturally-occurring proteins that smoothen the skin by filling in wrinkles. Better results are achieved by attending more sessions. The time between sessions should be three weeks.
The level of brightness of the light used is usually very high. As such, eyes need to be protected using eyeglasses. After that, the area to be treated is applied with a cool gel. The gel acts as a coolant for the skin as well as a lubricant for the equipment used. The practitioner uses the handpiece to apply pulses of bright light briefly.
The whole face or just a section may be treated using this procedure. The total surface area being treated plays a role in the amount of time taken, which ranges from minutes to several hours. The equipment cause a warm sensation. After treatment, the face may be cooled by applying ice on it.
The level of damage sustained by the skin is very low. This shortens the recovery time. Some of the factors upon which recovery time is dependent include the skin condition being treated, number of pulses applied, surface area treated, and skin type. It takes a few hours after treatment for any side effects to go away in most patients.
About the Author:
If you are searching for the facts about a Fotofacial Las Vegas locals can pay a visit to our web pages online here today. Additional details are available at http://AcadDerm.com now.
No comments:
Post a Comment